|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
ABAQUS FAQThe table below summarizes the various versions of ABAQUS on the SC systems.
Please refer to this page for getting started with modules. ABAQUS Availability
ABAQUS DocumentationABAQUS Documentation is available for the following versions: ABAQUS CAE/Viewer ProblemsABAQUS CAE is not supported (vendor decision) when run from one of the SC supercomputers and displayed on another computer. If you are having problems with ABAQUS CAE on k2, please try one of the following:
The above may also apply to ABAQUS Viewer. CAE/Viewer for ABAQUS 6.5 and upNote that ABAQUS 6.6 CAE and Viewer are now available on the Linux workstations in the Computer Lab at the Wisenbaker Engineering Research Center (WERC). ABAQUS 6.5 and 6.6 CAE/Viewer are NOT available for k2 and agave. More InformationMore information about using ABAQUS can be found at the abaqus man page (via the man abaqus command). You may need to initialize your environment for ABAQUS to enable access to the man page. The ABAQUS man page on each system includes system specific such as working with the system's compilers and batch system. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||